See how your game's FPS lines up with your monitor's refresh rate, in milliseconds, and how to make it smoother.
Last updated:
It explains frame timing; it does not estimate FPS for your hardware.
| Refresh rate | Time per refresh | Step up from |
|---|---|---|
| 60 Hz | 16.67 ms | - |
| 75 Hz | 13.33 ms | 3.33 ms faster than 60 Hz |
| 120 Hz | 8.33 ms | 5.00 ms faster than 75 Hz |
| 144 Hz | 6.94 ms | 1.39 ms faster than 120 Hz |
| 165 Hz | 6.06 ms | 0.88 ms faster than 144 Hz |
| 180 Hz | 5.56 ms | 0.51 ms faster than 165 Hz |
| 240 Hz | 4.17 ms | 1.39 ms faster than 180 Hz |
| 360 Hz | 2.78 ms | 1.39 ms faster than 240 Hz |
| 480 Hz | 2.08 ms | 0.69 ms faster than 360 Hz |
The jump from 60 to 144 Hz saves almost 10 ms per refresh; from 240 to 360 Hz, only about 1.4 ms. Gains shrink as Hz rises.
| Setting | What it does | Downside |
|---|---|---|
| VRR (G-Sync / FreeSync) | Monitor waits for each frame inside its range | Only works inside the VRR range |
| V-Sync on | Stops tearing by waiting for refreshes | Adds input delay; stutter below refresh rate |
| V-Sync off, no VRR | Lowest delay | Screen tearing |
| FPS cap | Steady frame times, lower heat and power | Lower top FPS |
| Player | Good choice |
|---|---|
| Story games, consoles | 60-120 Hz |
| Most PC gamers | 144-180 Hz |
| Competitive shooters | 240 Hz and up, if your PC hits the FPS |
No. A 60 Hz monitor shows at most 60 new frames per second. Higher FPS can still reduce input delay slightly.
The time one frame takes, in milliseconds: 1,000 ÷ FPS. 60 FPS is 16.67 ms; 144 FPS is 6.94 ms.
With G-Sync or FreeSync, many players cap FPS a few frames below the refresh rate. Without VRR, higher FPS lowers delay but can tear.
For most PC gamers, yes: each refresh comes every 6.94 ms instead of 16.67 ms, which looks and feels much smoother.
Only if your PC reaches very high FPS in competitive games. The gain over 240 Hz is about 1.4 ms per refresh.
No. It explains how the FPS you already get works with your monitor.